Barlow Tyrie Teak Colour Guard

Instructions for Use:- Before using Teak Colour Guard, eye protection and rubber gloves should be worn. Cover the ground your work area before starting- Grey Teak or Teak treated with teak oil must first be cleaned with our Teak Cleaner.- New teak: first weather for 2 weeks outside before treatment.- If cleaned wood feels rough, sand lightly before treating with Colour Guard. Make sure the teak is 100% dry and free of dust- Shake and stir Teak Colour Guard for at least a minute before use. Insufficient shaking can lead to uneven weathering- We suggest you try the Teak Colour Guard on a small area first (e.g. the back of a leg) to judge if the colour meets your expectations- Apply a very thin layer of Teak Colour Guard evenly over the furniture with a dust free cloth. Apply a second very thin coat after 30 minutes drying time.- It is recommended that you treat your furniture with Teak Colour Guard at least once a year.

Hazard Warnings:

- May irritate skin or eyes.- May cause serious injury if ingested.- Avoid contact with skin and eyes.- Do not ingest- Keep out of reach of children- Keep container tightly closed- When using do not eat , drink or smoke- Use in a well ventilated area- If swallowed, do not induce vomiting: seek medical advise immediately and show this container or label- We take no responsibility for misusage- IMPORTANT: Keep frost free.

Emergency First Aid:

- Eye Contact: Wash eyes immediately with large amounts of water - Get medical attention- Skin contact: Remove contaminated clothing immediately- Wash affected areas with soap and large amounts of water - Get medical attention- Inhalation: Immediately remove the affected person from the exposure area in to fresh air. Get medical attention if breathing is difficult.

Chemical Ingredients:

Water, Synthetic polymer, Pigments, UV Absorbers